6 Common Problems with Furnace Blower Motors

A furnace blower motor is a vital component of your furnace. When it goes bad, it can cause many problems. It is responsible for circulating air through your home; if it isn't working properly, your home can quickly become very uncomfortable. When this happens, you need immediate furnace repair Merced, CA

In this blog post, we'll take a look at six of the most common problems that can occur with furnace blower motors so that you can be prepared if something goes wrong.

Overheating

If the motor overheats, it can cause the bearings to seize up, eventually leading to the motor burning out. To prevent this from happening, be sure to keep the area around the motor clean and free of debris. Additionally, ensure the motor is properly lubricated according to the manufacturer's instructions. If you are not comfortable doing this on your own, call an expert for furnace repair Merced, CA.

Wrong Voltage

If you use a high voltage for the motor, it can overheat and burn out. Conversely, if you use a voltage that's too low, the motor will run slowly and inefficiently. To avoid this problem, be sure to check the manufacturer's specifications for the correct voltage before wiring up the motor. Ask your trusted technician for furnace repair Merced, CA if you are unsure.

Dirty Filters

Dirty filters are another common problem that can cause furnace blower motors to fail prematurely. When the filters become clogged with dirt and dust, they put extra strain on the motor, causing it to work harder than it should. As a result, the motor can overheat and burn out. To prevent this from happening, be sure to change your filters regularly. It's recommended that you do so every three months or so, but more often if you have pets or live in a dusty area.

Vibration

If the motor is not mounted properly, it can vibrate excessively, damaging the internal components and causing premature failure. At some point, mild vibration is inevitable, but it can be problematic if it becomes excessive. If your furnace blower motor is vibrating excessively, you need to call for professional furnace repair Merced, CA.

Worn Bearings

The bearings help support the rotating components of the motor and keep them running smoothly. However, they can become worn down over time, causing friction and resistance within the motor. If this happens, it can lead to premature failure of the motor. To prevent this from happening, inspect the bearings regularly and replace them as needed according to the manufacturer's instructions.

Loose Connections

Loose electrical connections can cause furnace blower motors to fail prematurely and require furnace repair Merced, CA. If any of the wires or terminals become loose, it can cause an interruption in the flow of electricity to the motor, causing it to work harder than it should have to or even fail altogether. To prevent this from happening, be sure to inspect all of the electrical connections regularly and tighten them as needed.

Heating Repair in Merced, CA

Furnace blower motors are vital components of your furnace; when they go bad, they can cause many problems. We've taken a look at five of the most common problems that can occur with furnace blower motors so that you can be prepared if something goes wrong. If you suspect that there may be an issue with your furnace blower motor, be sure to contact a qualified technician for assistance as soon as possible.

You can count on Loves Air for quality furnace repair Merced, CA. Whether you need a quick fix for your failing blower motor or want to have your furnace inspected completely, they can help. Call them at 209-566-8686 today to schedule a consultation.